Category: Architecture

Easy Source of Topics for Architecture Essay Writing Tasks

images5

cademic architecture essay writing tasks would usually be performed by university students taking up undergraduate courses in architecture, architectural engineering, building services engineering, architectural technology, building design, other courses related to architecture and building design. The selection of engaging and good topics would be the first that the students would do if they were given the option of choosing their own topics for their architecture essays. If the students are having some difficulties in selecting particular topics for their architecture essays, an easy source where they could find good topics would be the general discussion of the discipline of architecture.

The general discussion of the discipline of architecture is arranged into several main headings with sub-headings under each main heading, and for the most part, each sub-heading would usually have smaller topics that are confined to a specific area of discussion. The student could either select a topic from the main heading or choose the specific areas of discussions that are under each sub-heading that would become the specific topic for his architecture essay.

Under the general discussion of architecture, the main headings and their respective sub-headings are: theory of architecture that includes historic written works on architecture and modern architectural concepts; history of architecture that includes ancient architecture, Asian architecture, Islamic architecture, Medieval architecture, Renaissance architecture, early modern and industrial age architectures, and contemporary architecture. In addition, some of the sub-headings are broken down into smaller areas from which he could select a specific topic.

A student performing regular or constant writing of architecture essays as part of his course requirements should take note that the essay structure of an architecture essay is similar to the basic structure of other academic essays, which consists of sections of the introduction, body and conclusion. Consequently, the student should follow the basic rules or steps in essay structuring that he studied and learned from the other essay writing tasks that he performed from his other academic subjects. The specific content in section of the essay on architecture would naturally be different compared to the specific content of other essays. But the style of writing the content for each section would be the same regardless of the specific subject area under the essay.

The university and college students who would research and write architecture essay should take note that some of the possible topics they would select for their architecture essays could also be applicable and relevant to use for their other academic essay writing tasks. For example, many of those students especially during their first year of studies could perform history essay writing tasks. Therefore, an example of history essays about the architecture related topics could include the architectural history, history of various architectural styles, architectural mythology, and the specific histories of the architectural styles of different civilisations.

Overview Of Ibm Service Oriented Architecture (soa) Fundamentals Certification

home4

The increasing need for SOA can be complex for companies looking to use experienced IT professionals with SOA capabilities. Several contemporary IT workers do not have experience with the engineering that are the foundation for an SOA. This capabilities gap can slowly down and delay deployments among all but the most forward companies. Quickly creating capabilities is a need to keep rate with the opponents.

IBM WebSphere Details allows you get going easily via IBMs Web-based exercising series. Taken as a whole, the series provides a company foundation for recognizing, evaluating, and indicating your company’s SOA needs.

Test 000-669 – Exam Info
The exam includes six areas containing a complete of roughly 54 multiple-choice concerns. The rates after each area name indicate the estimated submission of the complete query set across the areas.

Area 1 – The Value of SOA (15%)
A.Identify company functions where SOA can enhance competition and efficiency.
B.Identify how SOA can offer revenue (ROI) (improve competition, website, improve responsiveness.)

C.Identify the SOA functions that make companies more nimble.
D.Identify the chance expenses of not implementing SOA.
E.Identify circumstances where SOA does not offer the preferred value or is not appropriate.
F.Identify the company individuals for SOA.

Area 2 – SOA Principles (26%)
A.Define the idea of assistance in SOA.
B.Describe the structural concepts used in SOA (for example: decrease combining and separating of issues.)

C.Describe the tasks that XML performs in SOA.
D.Describe the aspect of an assistance computer pc personal computer system operating system and/or database in SOA.

Area 3 – Primary SOA Structure (20%)
A.Describe you will of a simple SOA architecture.
B.Describe the components of the IBM SOA Referrals Structure, and their tasks and connections.

C.Describe the business assistance bus (ESB) and its aspect in SOA.
Area 4 – SOA Control (19%)
A.Explain the need for SOA government.

B.Describe SOA government and relevant concepts (roles and obligations, financing designs, guidelines, administration, crucial achievements aspects, and analytics.)

C.Describe Excellent of Service (QoS) problems relevant to SOA.
D.Explain the need for an allocated protection design (including problems like recognize provisioning and reproduction.)

E.Identify the effect of changes to solutions in the SOA lifecycle (change management, versioning, and assistance lifecycle.)
Area 5 – Preparing for SOA (20%)
A.Describe the components of SOA government that need to be resolved during the look for SOA.

B.Understand the value of saving company problems, individuals and goals when preparing for SOA.
C.Capture and assess IT problems, individuals, and goals (including analytics and KPIs.)

D.Describe the individuals, business, and technological innovation aspects that effect preparedness for SOA and its achievements.
To get prepared for Examination 000-669, it is first recommended that you are familiar with the job aspect information and the aspects this credentials is according to, as well as have knowing of the topics described in examine objectives/skills determined on exam.

Evaluate your own specialized stage to examine goals and the recommended exercising resources, and then determine for yourself how much planning you require

Pangnse Advanced Ip Ngn Architecture System Engineer

images19

Cisco Certified Architecture is the highest level of qualifications possible within the Cisco Requirements program. It is the epitome for individuals wanting to show their official approval of Cisco technologies and facilities structure.

This famous qualification recognizes the structural expertise of program Architectures who can support the increasingly complex networks of worldwide organizations and effectively turn organization methods into major technical methods. A Cisco Certified Architecture increases the organization requirements and objectives necessary to produce a strategy for a, large-scale, complex, worldwide program. They can turn organization factors and objectives into functional requirements for a program design. In addition, Cisco Certified Architectures can clearly communicate and recommend suggested Cisco program architectures.
Requirements

There are no official training applications available for the Cisco Qualified Architecture qualifications. However, candidates wanting to accomplish their Cisco Qualified Architecture qualifications must fulfill before an in-person panel made of Cisco-appointed examination panel associates during which the candidate protects their suggested system remedy.

Exam 650-754
Exam 650-754 includes 60 concerns and the time permitted is 60 moments or 1 hour. This test 650-754 is available in only British terminology. Applicants for Exam 650-754 can sign-up for examination at any Pearson VUE middle.

The 650-754 Innovative IP Next-Generation Network (NGN) Structure System Professional (PANGNSE) examinations will determine a learner’s understanding of the Cisco IP NGN architecture and capability to map specialized alternatives to business needs. This examination is a need of the Innovative IP NGN Structure Expertise for Systems Technical engineers.
650-752 Exam Topics

The following subjects are typical recommendations for the articles likely to be involved on the examination. However, other relevant subjects may also appear on any particular distribution of the examination. To be able to better indicate the 650-752 material of the examination and for quality requirements, the recommendations below may modify at any time without observe. They include:

Describe how to create and existing Cisco IP NGN alternatives as a company situation to the customer
Describe the Cisco IP NGN architecture
Describe Cisco IP NGN conditions and advantages
Describe Cisco IP NGN alternatives and how to arrange them with client needs
Describe typical client objections
Describe the aggressive surroundings and how to place Cisco IP NGN solutions
Describe how to create and existing Cisco IP NGN alternatives as a company situation to the customer
Describe the company and specialized advantages of the Cisco IP NGN architecture
Describe the company influencers for Cisco IP NGN structure applications
Implement Cisco IP NGN structure scenarios
Jobs of the Cisco Qualified Architecture
Lead growth and advance of architecture
Analyze engineering and industry market trends
Establish with regards to principles for networks
Selection of engineering and products
Identification of company resource needs
Direct the growth of connections and understanding strategy for system architecture

Applicants seeking to use to become a Cisco Qualified Architecture must also keep an actual Cisco Qualified Design (CCDE) certification, confirming their expert level style and company level skills set.

Implement SaaS architecture to improve organizational storage space

home11

These days, organizations are growing rapidly with outstanding performance and productivity. Data is also increasing along with this business improvement. This data includes; finance details, human resource details, requirement and project details and many more. Applications, hardware resources, software programs, operating systems and many more are also considered important information. It is important for every organization to store and maintain this crucial data for longer years. Data storage is the main problem for all IT organizations, as it takes much storage space to save and maintain the data in a device. Usually, servers are used as the main storage devices to maintain the information for future references. But, these servers have the limited capacity and cannot afford large amount of information. Due to this, IT organizations have developed several technologies and applications to enhance the storage efficiency in business enterprises. Cloud technology is one, which provides computing service through internet. Cloud computing is the latest service provided for all industries to enhance their business performance with various services like infrastructure as a service (IaaS), platform as a service (PaaS) and software as a service (SaaS). All these services can help the organizations to get several business solutions. SaaS architecture is the one that provides storage services for the enterprises. It is defined as a deployed software as a service program with a business IT structure and set up. In this architecture service, SaaS also described as storage as a service as it helps the organizations in maintain the important information for further references. Inefficient software programs linking can lead to less efficiency of growth and greater loss of cost; hence, SaaS architecture is important for many business industries. It can provide best profits with great customer service and remote access for various applications and tools to enhancing the business more effectively. It can save the operational costs by reducing the other physical resources as it can save the data in their internet databases. It is more effective to perform IT operations and specialized services to help the enterprises in several aspects to increase the profit margins. It also enables web services to provide various solutions through online using network connections. SaaS is cost effective solution as it is provided by the third party vendors or it can also be paid according to the usage. Hence, most of the small organizations are planning to implement these architectures to enhance their business performances and productivity.

>

For more information on SaaS architecture

Enjoy the Architecture of Guru Ka Tal during Your Agra Tour

home17

Agra, which is located on the banks of the holy Yamuna River in the state of Uttar Pradesh, is world-famous for the majestic Taj Mahal. The city served as a prominent seat of the Mughal Empire for a long period and was the capital of Hindustan during that time. It lies at a distance of about 200 km from the national capital – New Delhi and easily accessible by road, rail and air transport from different parts of the country. The city has an extreme climate in winters and summers, with moderate temperatures in the rest seasons. October to March is considered as the ideal time to visit this historical city. If you wish to witness the grandeur of Taj Mahal and other prominent attractions of this place, such as Agra Fort, Jama Masjid, Moti Masjid, Fatehpur Sikri and Guru Ka Tal, then go for an Agra tour that can be availed from various travel agencies and travel portals.

Guru Ka Tal – History and Architecture

Originally, this reservoir was constructed in the year 1610, during the reign of Emperor Jahangir beside the tomb of Itibar Khan Khwajasara, to collect and preserve rainwater. The walls and embankments of this water reservoir have been made of rubble masonry and brick. It has a square design, with a long and wide ramp paved with stone slabs (khurra) and upright bricks, and stepped ghat. The walls of this structure feature four double-storied towers having an octagonal design. The top storey of these towers boasts of Mughal architecture, with an octagonal spire with brackets and pillars. The material that was used for constructing the ghat was red sandstone while the spire had been decorated with dazzling tiles. Constructed on a four feet high platform, this reservoir features four chhatris on its four corners with 16 pillars, with carved brackets and capitals. The corner domes of this place have a spherical design while the one on the sides have an oblong design.

At the time it was built, this reservoir had 12 towers, but today only eight can be seen. It had effective inlets of northern and western parts of the tank; a canal used for channelling excessive water in to the river and a dam on its south-eastern side. The water collected in this reservoir was used during dry seasons for irrigation. The terrace on the top floor is accessible through a wide red sandstone stairway, located on the southern side.

If you wish to witness Taj Mahal and other important attractions of Agra, then choose for those tour packages that include trips to all these important places. As this city offers a lot of see and to do, it gives the ideal opportunity to experience the best of India holidays.

Architectural Evangelist Advocating Innovation In Architecture

home6

Architectural Evangelist is a one of a kind architectural newsletter broadcasting the message of the cause, effect and need for innovation in the field of architecture. It is the brain child of a team of designers, architects, content developers,and technicians. We are speaking to architects, students, builders, interior designers/decorators and re-modelers. Architectural Evangelist braces the change of seasons with our centralized them of spring in the first issue. Our aim is to maintain Architectural Evangelist as a quarterly issue, with news and updates about the business of offshoring, architecture and design; How Tos; creative inputs from design experts, technical professionals and industry gurus; and articles, resources and everything in between.

Spring/Summer 08 design tips for your home
Color, breeze and sunshinethats what comes to mind when you say spring. Design tips for your home that can make any ordinary room into a fun, cozy haven This spring spruce up for a breath of fresh air to sweep through your living spaces with Architectural Evangelists design ideas and tips that spell spring like nothing else can.

Going green
Building and construction have a great effect on the environment. In the United States alone buildings alone account for 40-49% energy consumption, 25% of water consumption, 70% of total energy consumption and 38% of total carbon dioxide emissions. Green building information, tips and trends.

The new face of outsourcing
In this age of competition, companies are increasingly turning to specialization for improving cost and time feasibility and increasing efficiency. With knowledge intensive areas entering the fray, it allows organization the flexibility and provides the resources for the business growth of the organization
How to tip: Choosing the right offshore services provider
To build long term relationships with offshore service provider you need to play detective and find out all you can about the organization first. Heres what you need to know

Sustainable Architecture-One planet, one experiment

home4

Sustainability means managing the resources well without damaging the environment now or in the future. In other words sustainability also refers to ensure that our decisions today may not harm the future opportunities for future generations. Now, have you ever thought that what a sustainable architect does in terms of product, process or buildingdesign?Sustainable architecture is a term that describes environmental friendly design methods in the field of architecture.

A client can believe on sustainability but the proof and evidence can help the client to better understand the concept of sustainability. Architect Brighton offers sustainable modern architecture, design and master planning service in order to meet the needs of their clients. Their goal is to create -green’ architecture which is magnificent in terms of design, keeping in mind the sustainable lifestyle and culture. Sustainable architect is not an individualist approach rather it’s a holistic approach. These architectsare more concerned about the reuseand recycling of the natural resources that are input to a building. A well designed building will have number of issues like water and energy utilization, proper use of materials and much more. Architects can deal with the ecological aspects of constructing these buildings. These aspects are designed to increase the efficiency without being detracting from the function of the building.

Sustainable architect focuses on designing a unique set of strategies to construct or develop a building intelligently. The architects minimize the use of nonrenewable resources in the development and function of buildings. These architects must consider the material flow in the building ecosystem. Few of these have been mentioned below:

Building materials and used materials Energy usage and combustion by products Water usage and Graywater sewage Consumer goods and recyclable materials Solar radiation and wasted heat Wind and polluted air Rain and groundwater

Before constructing a building, Architect Brighton keeps in mind three important strategies i.e. energy conservation, water conservation and material conservation. Apart from this, an architect should put certain efforts to reduce the impact of a building on its local environment (e.g., current terrain, plants, wildlife).In order to attain sustainability, Sustainable architect must be well educated and professionally trained about the various environmental issues. They must be well aware of the methods and techniques of developing a sustainable design building with economical use of natural resources. If the growth would concentrate on creating the best with what already prevails, re-using or adjusting current components and communities, certainly the outcomes would be remarkable.

World Architecture Festival 2013 – a report

images4

By Team IAnD Photography: Courtesy WAF’13

October 2 -4 2013 saw three busy days of ideation, discussion and critiques on global architecture and design at the World Architecture Festival held at Moshe Safdie designed Marina Bay Sands, Singapore – a venue as awe inspiring as the projects that unfolded within its festive panorama-

The World Architecture Festival opened to enormous numbers (reportedly the biggest yet) with the theme of 2013 bring -Value and values’, -to examine the relationship between perceptions of financial value and the values that architects typically hold about their work.-

Director of WAF’13, Paul Finch commenting on the sheer quality and diversity of the projects entered into the festival, and shortlisted for the final round of awards, said that the array of projects demonstrated the increasingly global nature of the event.

Among various stalwarts from various quarters of the world, Mumbai’s Ar. Sanjay Puri’s corporate project in Jaipur -72 Screens’, was also shortlisted for the awards.

A vibrant, thought-provoking three-day session of presentations of various projects by the architects, seminars and talks on diverse issues that touch and plague the building industry were discussed and debated. Noted international speakers, project critiques and appreciations apart, everyone waited with baited breath as the ultimate honour – the winner of the World Building of the Year 2013 award was announced and granted to the Aukland Art Gallery Toi o Tamaki in New Zealand by Frances-Jones Morehen Thorp and Archimedia.

The four main award winners including World Building of the Year Award were Botanical Garden Australia designed by landscape studio Taylor Cullity Lethlean and plant expert Paul Thompson for Landscape of the Year; National Maritime Museum of China designed by Cox Rayner Architects for Future Project of the Year; and Barcelona Apartment by David Kohn Architects for World Interior of the Year.

As part of INSIDE: World Festival of Interiors, an event held in conjunction with the WAF’13 with a concentration on interior projects, shortlisted 59 outstanding interior projects across the 12 award categories, Bars and Restaurants, Creative Re-use, Culture, Display, Education, Health, Hotels, Offices, Residential, Shopping Centres, Shops, and Transport. For the complete list of awardees, do check out:

to view images click on globalhop.indiaartndesign.com

Enterprise Software Architecture – Improving Business of an Organization

images17

Enterprise Architecture or Enterprise Software Architecture is the organizing logic that is used for business processes and software development service. It reflects the integration and standardizing needs of any organization’s operating representation.

Enterprise architects implement several methods and tools to get an idea of structure of an organization. To accomplish this task they produce several documents and models. These models and documents are called -artifacts.’ Artifacts are used to illustrate logical organization of business strategies, metrics and capabilities of business, information resource and networking infrastructure within the organization. A complete set of such artifacts are enough to illustrate the -enterprise’ architectural description of any organization, including software development companies.

The framework of enterprise architecture is an assortment of tools and processing models and assistance applied by architects in production of organization based architectural descriptions.

The main motive of architectural description of an organization is to enhance the efficiency of the business. Hence, it includes an array of tasks. While describing the architecture of an enterprise, architects pay attention to innovative structuring of the enterprise, centralized or federal business processing, quality offering before deadline and a justified expense on information technology. Information availed by architectural description can be used in various ways but its main purpose is to bring an improvement in the business functioning. In the present scenario, it is widely used by numerous companies to improve their business architectures, its performance and productivity.

Currently, Enterprise Software Architecture has become the key component of information technology control in almost every organization. Such companies have used a basic process of enterprise architecture as an important part of their information technology management strategy. The team of enterprise architects stands for different functions such as several aspects of performance engineering, IT portfolio management, management of metadata as well as improvement on custom software development services.

How is 3D printing technology used in Architecture and Medicine

images6

D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >

Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:

3D printing for Architecture

Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.

3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.

Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.

3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.

3D printing for Medicine

The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.

The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80% in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.

Page 3 of 4«1234»

Recent Posts

Best Links

Copyright © 2018 Big Estate 224